In this lecture, we will be clearing the inspect toolbar of modern workspace. We already covered sketch, create, modify, and construct toolbar. So, in this lecture, we will be using this particular sketch that I found in the basic training of Autodesk fusion 360 is backup and that's a threaded mount. So we will be using this mount in order to understand the ins and outs of each and every commands of inspect toolbar. Right. So first of all, there is this measure is there that is used to measure distance angles between into particular edges, right or points or what axis.

So for the laboratory the same same the same thing as you can see here it's learning a 3d model. But the same thing it reports distances, angle, area or position that are selected object. But the same thing goes for sketches also, let me demonstrate. In this browser, I'm having one sketch dedicated for the same when I added this one. Let's go on and edit this. If I need to find out the distance between this line, and this line C, as you can see, it is in the palette in this measure palette, this was the sketch palette.

This Missa palette you can see the distance is hundred 2.419 when I'm scrolling here, when I run I'm holding my mouse here You can see that you can click to copy to the clipboard also clipboard also and this is displayed in the graphical user interface. Similarly, I can measure the angle between two and it is also like this. See it is 74 point 74.9 degree. All right. And the same thing goes for your 3d model also. Let's get to home.

Yes. See, when I click that, here, your selection filters out there that means it can detect the distance between two bodies also. And two components also, initially, we can select face edges and what it is. Alright, let's check a distance between this one this one So between the between these two phase phases, or stances, as you can see here 77.3 double two right. Now let's close this one. Let's check a distance between two edges.

Let's hit this one and this one right, it is not clearly visible here, but it is 14.403. So, this is the users of your measure commando is factorable. Now let's head to interferences. This will this command we will be discussing when we are assembling body and we are going to have a separate section for Because assembly cannot be explained with two or three lectures, assembly takes time. So, there will be a separate section for the same in the coming lectures. So, this interface will be explained there.

Now we are having one curvature commonalities which shows the amount of curvature at sample points along the selected ages. That means, if I'm selecting any edge See, when I'm when I'm clicking on curvature, curvature analysis, it's asking to select the edge let's see I'm selecting this edge. As you can see, a common like structure is made on top of this one, I can change the density of the same and with keen observation we can detect if any abnormalities are there in the curvature that's why curvature analysis is their next one See as soon as we start with analysis one analysis portion also occurs in your browser which you can switch on and off. Next one is analysis, it basically displaces striped pattern on the selected bodies. This is useful for data mining continue Tina structure let's select a body only bodies election is allowed here right.

So, by these you can see if continuities there in the body or not. If discontinuities there then you will you will see some What do you say, some disturbances in the striped pattern which is not present in this particular body. You can also call this one off let's call this one off Next one is your Draft Analysis. Draft Analysis is basically to determine if a particular component or a particular body is manufacturing ready or not. I have to select the body and I have to select Yeah, it's electric that he listed this one right. We're gonna do the opposite he also.

So, the basically the green area is the finishing area and this red one are the cutout areas. So this shows the machinery will be the manufacturability of the body. Switch off the draft. Next one is your curvature map analysis. All right. It is basically two valued areas of high end Surface curvature, if a body is having high curvature certain area and a low curvature in certain areas that we can find out prior to machining let's let the body right.

So this law would you say irregularities in the body that's why it's a clear clear representation here. Next one, your section and this is a really important thing if you're trying to find out what's happening inside of the body or if certain certain certain bodies or certain components is hiding your view in order to create certain stature on the inside of the body. If you are if you are trying to make a cut inside you That case actually analysis comes into play. When I on this one it asked me for a face. Let's select this one. And as I drag this and you will get a clear idea what's happening.

See, this is a section analysis switch like this only. And you can make the changes on the faces by creating a plane here, inside only. And I can switch it on and off also. This one is center of mass center. Basically, it determines where the center of mass of the body is located. So when I select this one selected body, click OK. See, it was there for a moment.

Right? See, there's a central mass of this particular board. The last one is component colored Second toggle which we are going to which which again we are going to explaining in the assembly parser assembly portion, which is in the coming section. In the next lecture we discuss about attaching canvas. Thank you