Now, in this lecture, we are going to learn about the Modify toolbar. Earlier we already completed with this sketch create now we are propagating to modify toolbar model workspace. Now, here you can see is there that we have already completed the extra portion. So they are basically the same right and here it is their full fledged chamfer shell draft scale combined, replaced face split face split body sellouts Split. So in this lecture we are going to cover from select to allow split. Let's begin with it.

So prior to go into this what we are going to do we are going to use the box that we have already covered in the previous lecture. And using this box on the I will be telling you about each and every commands are modified over right. Okay let's get a box first. I changed the look of the environment if you have noticed, because this is much suiting to rise. Okay, I've created a box and using this one. In this tutorial I will be telling you about how to rename your bodies how to rename the entireties From the browser, this is your browser.

Right? As soon as I save the file the name unsaved will be changed. Now, as we can see here we are having 1-234-567-8910 11. here about 11 commands are there. So what I'm going to do, I'm going to make 11 copies of this box and using each and every one of them I will be telling you I will be explaining you about these commands, right. So first, let's make a copy. What you have to do you have to just go to the browser, select this body you have to just copy and paste.

Right, as you can see, there. This is your copy paste command. You can just copy the bodies even sketches also you can copy right here I'm using the move command that will come Afterwards in modified right there, what's going to be a very cumbersome task when you are selecting each and every one even if you're selecting two and then copying and pasting in the same then four will be there then again you have to select. So, rather than that what we will do we will use pattern that we are used earlier we are going to use a rectangular pattern and here we are going to select the bodies right, this one and this one then they shouldn't let it be any day should not an issue. Okay, not to six I need at least. Okay 11 commands are there.

So let's let logic be 12 little bit drill boxes to be there. Now, let's press OK. So these are other separate separate bodies. Right. Now we are going to rename them first we are going to use it alright so for that I will use this body. I will double click in the browser with body one is located this one and I will write each fill it for threat i'm doing i will let you see it and now I will explain you the affiliate command you can invoke the command using F or you can just click it here and you can select the edges that say this one new this one also yes the scope and just drag the mouse and you can employ the fitted there.

Right. Austin radius you can change it to kotlin also and you can view curvature also see Let it be there. This is done. This was the Phillip command. Next one is your rule Phillips rule it uses a phrase a particular phrase of the body. So first of all, I will be using the second body for rule affiliate this one so let's rename it to rule.

Feel it right. After that, we are going to invoke the rule affiliate command. Let's select this face just drag the mouse Okay, too much. This one, this much is sufficient. Press OK. So this is your room fill it for you.

Next one is a gym. Full It applies a bevel to one or more ages for Okay, I will use which one Okay, this one I'm going to use for chamfer let's rename it to chamfer right let's go jump over to it okay I will select any of the edges and I will just drag the mouse or I can directly do the you the quantity here also. Okay no 15 if it's a it's a crossing the limits of the body itself. So it issue era that was shown earlier. So chamfer is done. Next one is your shell.

So very good. Come on. You can create a shell of a body okay. Some I will choose to make a shell. This one for Shell. Right?

So this one I'm going to use for Shell you have to select any of the face. Right? And you can view the values here. Let's see. Shall is created. Let me check one more thing here.

Is it is it is it? Yes, yes, yes, my resort style was she has to share it. That's why you're not finished. The visible ages are not there. So shaded with visible edges I would use so that I can see this also. Right.

Now, next one is a draft right let's rename it to See giving naming to particular components in particular bodies in particular sketches helps in the long run, because you will remember what you're doing with your project, all right. So, let's go for draft, this one is draft for draft law to use two of the faces and you can use this handle to create draft right, you can make it symmetric also. But this is not the case here. Once I will be taking I can flip the direction also that we flip it to the bottom. So let's unclip it and click OK. Right, this one was draft.

Next one is your scaling. The scaling is basically the Scale bodies or component sketches. By providing a scale factor, you can make it bigger you can make it smaller basically. So for using scale, I will use this body scale trees. All right. This morning I'm using, I can drag the mouse itself.

I can make it bigger. Let's make it smaller. As you can see, the scale factor is changing. Let's make it point five. That means it's half of its size. Press Enter.

This is your scale command for you. Next one is replace face, right you can replace the face. So students so one extra box will come handy right now because we are going to replace a face Alright, let's use your best face I selected this one, when I replace it with a third target face it will go to there. Right? Most of you do this Come on, and these two are different bodies, they are not combined. I'm not knocking words combined is a different tool.

This is combined. So nasties combined itself. So for replace this one was there initially and the other body was rich this one. So now we are going to combine these two using combined right now it's combined you can see there is no no bonds between these two. So they are combined now. Right?

This combined one I think this one is So, I will write it as replace and combine Next one is your split phase you can split the phases that that means you can divide. So, I will select this face, I will select a split splitting tool, if I select this as a splitting tool, see, this is too much far from here. So, first we will create a lane from for the same that said this one. Now, we will use split phrase select this one, select the splitting tool as this one and yet see it says once treated Alright, next one is your split body. You can select this one. Okay, I'm not writing again here because my point has been made that you can change the name of the bodies change the name of the component so that it becomes easier for you to comprehend what is actually going on with your project.

I will use splitting tool let's say no. Again we have to give it upset then somewhere here let's say this one. I'm going to split the body this one I will use this as the tool and split split. Okay, I will switch on the construction lines, construction planes and you can see this printed portion right next door The last one is we'll see how to split. You have to just take the direction first, and then you can take the target body. It will create us how to split, but initially, it is for a shell one so that's why you're getting a warning.

So let's change it to split solid body. See, perpendicular to the edge, you have choosen it really split the body. So thank you guys. See you in the next lecture.