Making the rocket the rocket body currently have both the board measuring 28 by eight inches to make the door grow rectangle measuring two inches wide but three and a half inches high at one end of the poker board. The rectangle should be one inch from the bottom and four inches from the end of the poster boy because the long sides and the bottom of the rectangle but leave the top uncut. Now that one large rectangle at the other end of the poster boy, it should measure 12 inches long and four inches high. This rectangle should be one inch from the bottom and three inches from the end of the row the poster boys from the end opposite the door and to the rocket by approximately three inches in diameter. Tighten up the overlaps and use a piece of tape to keep them in place. The door user mentioned they shop on the watch you want the door to look like I'm using a piece of aluminum foil.
Just make sure it isn't too heavy. You want the rocket ship to be as light as possible. The most common use a nine by 12 sheet of construction paper, any color you wish. Using a compact draw circle with a four inch radius but the circle out. Now cut the circle from the edge to the center. Begin to fold the circle until it reaches the diameter of the rocket body.
Use that piece of tape to hold the call together. The rocket floor. Use your compass to make this more simple, the diameter of the rocket body approximately three. That means your purpose will need to be set at a radius of one and a half inches. Use the same poster board you did like a rocket body. When done, cut out the circle and satisfied assembling the rocket with the help of a long piece of tape, start taping the rocket body and those come together.
Use a piece of aluminum foil to make a silver ribbon and wrap it around this seam between the body and the comb. The foil should go all the way around the nose, glued it to the rocket and let it dry. Use your favorite stickers to decorate your rocket. Use imagination and decorate your rocket any way you want it Making the red. print out the red template PDF. Use the template to trace the shape of the ramp, the curved lines and the folds onto the poster board.
Cut out the shape of the ramp and the cut lines. Now put the ramp together to hold it together. Making the platform the platform the rocket takes off is made up using brown cardboard paper towels or toilet paper balls. Do you need to make three equal rows measuring three inches of each row has true wanting to sleep cut opposes each other. Do this for all three rows. Use the remaining poster board to make a circle.
The circle should be four inches in diameter. Set your compass for two inches. ranges and draw your circle. Cut out the circle. The circle will be the base of the platform using your rocket. Place the brown rose on the bottom of the rocket by sliding the rocket into the slits of the ground ropes.
When down, your rocket should stand up straight. Place the rock rocket on the bass. The bass can open the door off the rocket and place the small circle inside.