Come on enjoy our last time that is a cable join. Let's see what is a cable join. The cable join is a translation join and it consists of two prismatic join and considered the sub join of the cable join, which is the our link with the ratio. The joint is used when the translation and the motion of one part cause the translation in the motion of another, either at the same rate or based on a ratio. An example is a hydraulic mechanism where the moving of piston is one animation allender calls in another cylinder to move the different distance depending on the volume if it required the mechanism that cable join can be controlled by one or two length commands that begin with final try. Give a giant for making the table join for over a decade as affair then go to start digital marker bmu kinematics.

After getting in dm a candidate says click on Insert click on new part and one time contra and you will get the part one just click on this part two, one just click on sketch click on visor click on your center rectangle origin just click here in the dimensions and this is get 100 and this one also to 100 aerodynamic in the square toe 200 no exit and given a mirror, click OK. Now this is my part one, just double click here and go double click on now once more insert new part. Click yes document and click on product. You will get this one. Let's click here. Let's double click here on part two. Click on sketch click here on the surface, then rectangle Mr maker angles then square it.

This one is grantee and this one also 20 grantee, okay. The counterpoint just coincided. If you don't go inside it, it doesn't matter. Okay. Exit bad Okay, now click on sketch like this surface just click on this one and project to the element automatically this elevate happened click here it will save your time then symmetric one take symmetric sir and this one thought this will happen here. Just click here once more symmetric and this one time to upward.

No Exit okay everything is done my boy my boy parts Already now for the third part, just double click on product, click on Insert, click on new part. Click Yes. Now in part three we have to draw. Let's click on this plus, double click on this part three, sketch, sketch on the surface. Making a rectangle here. Click on rectangle and click to your desk your dimension adds 2020 Okay, this one also 2020 Okay.

Dragging it outside, giving you exit back. Okay, now everything is ready. No time for the color changing position you just click right property. You can write your product name you can write everything here your digital will come in the mail. Well, just changing the graphics, click on graphics and no color I'm changing to ello and transparency apply okay. So everything I'm changing the colors property, no color to change color on sponsee Okay, apply okay.

Property change color blue once once a couple Okay, now everything is ready, my thing is ready. Now directly I'm going to just double click on product quantum is going just go to inside and new join an indirect go to cable George click on cable join. Let's see what is mean by mechanism. First. Let's see what is the mechanism? I'm specific, which are mechanism you want to apply to other join have option to create a mechanism by clicking the new mechanism button You may can be changed your mechanism name by dragging it and you can see whatever you name want you can type there this drag it and you can change your the mechanism name also just drag it and you can change the mechanism name also, or keep it as the ante icon Okay, here the cable a cable one.

Let's see what you mean by choice number name let's see what is meant by joint name? Oh yeah, you can drag it on you can change the drone joint name that is a cable name one name one was written Yeah, you can write anything you name what you want. Then after a great year, click on the Create. And for the prismatic joint. If you want to know about the prismatic joint, just watch our second video on what the second lecture on prismatic you will get everything to get in there. No, just click this line and this line.

This software is This phase Yes Okay. Then after on this one create this line and this line this surface and this surface. Let's click on OK. Yeah, the ratio, the ratio let's see what is my ratio support this is my 300 and this is the hundred, then the show is one by three. And similarly, only one time at one time we can do our Linda wanna lend one, one prismatic one, one or two. See, it is taking for only one I'm giving to this one. It doesn't matter and one and click Insert expired.

Let's see before the fixing the part where it's been fixed by let us see what is the fixed part of fix. That is the anchor symbol, the location in a space of a part in the assembly, choose this option one apart is a kinematic and more be fixed before the simulation is possible. It is the location on a you can imitate that toolbar icon I will show there that please note that the mechanism need to exist before a part can be defined. And this was the fixed part just clipping your own is part one. Then we have Richard that demographic and Mr. Winterton now time for the solution. click on Insert, click on simulation.

See when minus hundred and just I'm keeping this one as equal to one and this minus hundred I'm changing to minus 200 you can change anything. Let's see what is my check came in joint and K push on exit. Let's see what is mean by the key position on exit. Remember the current position of your mechanism when you are exist. The mechanism simulation If option is not activated the mechanism can be will return its original position when you exit it. So we need to keep the polish on on exit.

Let's see what is a checkpoint limit. When activated this option, open a dialog box that check to see if the joint is limited and are being to check recheck throughout this simulation. Now I'm keeping the position on exit, then insert is four. Before going to operating this let's see what is in guided simulation simulation player and commands this symbol Should I jump to start or return instantaneously to the beginning position of the simulation regardless of the current location. These symbols show the step backward. The step backward one frame at a time this symbol show, play backward.

Play the simulation in and reverse from the current step until it reached the beginning. This symbol show the ball is a simulation. This symbol show play forward that played the simulation forward from the current step. This symbol show the step forward a step forward to the simulation and one frame per play. This symbol show jump to the end the escape die instantaneously to the end of the simulation. Now for a submission just clip this as low as low as give this one as low as possible.

And then Got to click on just click on Insert click on simulation and here I am giving as a minestrone run this is one don't change the Spain Kip widgets on exit let's see what it's like keeping the pension on exit now let's begin to simulation box see it's a position on exit answer is for the low before going operating this let's see what is meant by a determination box. Now I'm keeping this as possible as low and play this will restore the look and this was our cable join finally and now let's see what is the clashes getting awkward between this cable join and finally after his class just apply here click this one as a reference Let's click on Apply. Click ok. You will find this on in application just like any defense, you will get that last year and simulation year this year I'm doing just okay.

You can change the simulation from year also. And now it's time for the mechanical engineers. Click on analyze click on mechanical analyze. And let's see what is mechanical analyze first and afterwards we will go for the mechanic and analyze. Let's see what is that analysis mechanism? We have to perform the detail of mechanical analyze of the mechanism and review its performance, the Analyze of mechanism commands, we'll just do that, that Come on, that I've shown you.

I'm doing it it's located in a deal and view the M you can emetics toolbar to analyze the mechanism to create if other matters aneurysm can exist they can be selected from the mechanism name and alleged and the new analyze information will be displayed for a selectable mechanism that along the indicated if there is a possible for the simulation why the mechanism the mechanism can be shown for an example that cannot be simulated, though. In this the option in the mechanism analyze and a dialog box are discussed as below. Let's see what is the mechanism name, the name of mechanism being analyzed. Let's see what is the mechanism can be simulated indicate whether the mechanism can be simulated or not. Let's see what is the number of choices the total number of join in the mechanism. Let's see the number of commands, the total number of driving combine in the mechanism.

Let's see what is the degree of freedom without the command, the degree of freedom among all part before taking into account, any driving command in the mechanism should be much least one and show the equal number of command. Let's see what is the degree of freedom with that command? The number of degree of freedom in the mechanism, only one driving command our consider should be zero in either performance of simulation. And this was a mechanic and analyze. I'm getting this question okay. This for the prismatic seven this one.

I'm saying cat Yeah, and this was a cable joint cable, cable join cable joints. Just remember where you have saved that folder. And then to save off the word I'm opening that folder I've given the name as cable join opening that file, Excel you can save as so tax also in this mechanism allows you can find everything what you have analyzed in the mechanical engineering is an expression I have given before you can see in your laptop just clicking close or you can see on up cells just clicking on close and, and this was our table join. If anything you have to die just click on the simulation is false so you don't keep one. I hope that you have understand this the cable join means one part is going up What is this one? It says it is the working together it can operate in slot also and I think Hold this you have understand this.

They will join and meet you in Nash close by for this course.