Welcome to everyone for a nest join IDs are screwed join, let us study what is a screw join and the screw join is a translation or rotational join which is linked together with a specific pitch ratio. It is an element of five degree of freedom and allows allows either translation or rotation, the chosen one being the other. It is used when a one pipe is needed to move a linear being a rotation with respect to another part, for example, are not being tightened on a bolt or when a part is linear, causing a desert rotation. No professional with respect to another. For example the child toy where the plug is supposed to move tops being if it required by the mechanism, a screw giant can be controlled by either one angle or one length. Come on.

The other is automatically driven on the base of the specific pitch ratio. Welcome to everyone for the school join before that just opened up get your software then click on Start and digital mock up day in that you will find the me paralytics just open DMU Kyle event takes and this interface will just click on Insert, click on new part. Click on product and click on this plus icon. You You will find his blood just about click on this bar to one. Now click on skate. I'm going to alternate mode.

I'm doing it during the night you're in the rectangle, you find the corner zone dusky here, and afterward I'm giving the dimension now is type d 2.1 to eight. Then click on circle, click on the center circle. from year to year it is better to point it at the center just click circle. Oh, I'm keeping 16 is the M six Just 60 then eggs suit go to bad option. I'm using the mirror pad here. It is just 16 mm having the net about that it's about 12 now, for making the looks of not just click this I will click here it's ready for me or changing any dimension just click on this pad option.

It is now 24 which is to bigger forward that it is mirror. Just keep on just click here seven is seven mm is just seven mm or is 14 up and down and click on this other surface Sorry for the things I've done. Click on this. Our sufferance get checked from our surface. You have to draw center circle. Click on this.

And yeah, and now just zoom it and you'll find your line one line, you're just click that line and this line by pressing Ctrl there afterwards, go to tangency. Click OK and exited. You have to find the plane with cheese have the short three phases, this shorter three phase. So click on visor 10 and click on sketch option. You will find this align now project to the element. Click on this circle which I have drawn.

Here. I've drawn it circle click on that circle Keeping normal now click on profile and click on this endpoint that endpoint has not been properly just click on profile and endpoint just make this simple sketch after all, I will give dimension you're on constant. And this one and this one. Remember, this is Todd Dickey. And it is doesn't matter what dimension it is having the steroid and just just click or you can just control plus click this three lines and I'm going to mirror option mirror, click on this edge is correct. You can also trace 36 it is 30 degree arrows.

Today and I've got a con eggsy button before that forward to delete this, just click here, click here and this option it will come got it now just click this element this element and exerted you will get this triangle only now tons of time for the crew option click on group right click here click on Zed or you can click on this we it is Rihanna it is we vertical econ is vertical or directly use direction Zed axis con. Okay now or not is ready. I'm not making the wordings here. Or it is you can make readings in for the class I will show how to make credit also. And now does DoubleClick calm product is smart. This is metal ating net now for go into insert.

Now once more new part and click on product in this dialog box will open or directly click on yes, it doesn't cut click on one common product after that coming click on this last icon double click on part two, double click on part two. That's option great on xy plane. Just click this out inner circle and Project 2d element first one selected element or you can call the circle also you exit now bad and this will have the best allow for T and pick. Oh, okay, just pick okay 440 and take on this surface, catch two and your game is gone. Just make like this. After forgetting, click on this endpoint and by pressing the control button click on this endpoint both endpoint and coins.

Okay, you will get that dimension which have gone for before also click on exit and this is only for in press OK. Now for similar for making that same procedure, you'd be surprised. Click on sketch you're deserving Circle. Let's click this circle further to the element and exerted same circle we needed click on wise it pens that shit. And now we have to make this zip version element and click this add personnel in and click this option constraint and then afterward one more click on it. Hide data. We want that one Okay.

Now click on profile, click the endpoint suppose anything happened leg it's gone. Suppose, like this happen for getting correctly click on this endpoint and is there a point just do coincide it will get how to do this. Click on this constant like on this and this. Remember, angle is 30 degree that is the standard angle. Then click on exit workbench and one small group and right click here and said access right click Insert access preview okay my parts ready now just double click on product for changing anything just slightly just right click and go to property in this part one was might not know but one not just apply afterwards and current changing to this one apply A low giving transparency apply. Okay.

Now for part two, just click right click and go to property. Boom, sorry, hold on, no graphics allowed to and given this on as blue one above you, transparency, changing apply Oh, hey, this is my object which I want to select just adjusting it click on Insert. Now my next choice is group boy. Let's see what is in my new mechanism. Let's see what is the mechanism specific which a mechanism you want to apply to other join hi have option to create a mechanism by clicking the new mechanism button and you make can be changed your mechanism name by dragging it and you can see whatever you name want you can type there. After that one click on new mechanism click mechanism.

You can change your mechanism name also. Let's see what is my screen sorry, let's see what is my joint pain. Let's see what is joint name, a specific or name for the joint and other than the standard cat your name which is in the field of highlight the text and type over the name if we want to choose and change it. Afterwards your attention join name also click the join. Now let's see what is line one and line two. Let us see what is line one and line two.

The corresponding on each byte which is defined by the translation and the direction between the two parts and or the command axis, rotate between them, the line become a coin side when it update, if it's not already have third line one and line two line one is this one. And you're you can't find a line two for finding line two, just right click and hide this one and inner circle. You will find that on line two, or in a circle, just come here and click on this line two. On unhiding this part let's see what is angle driven and land driven. Let us see what is the lender would indicate that the land command will be used to drive the screw motion and the rotational will be automatically awkward. On a best of the fit let us see what is the angle drew one that indicate the angle command will be used to drive the screw motion and the translation will be automatically awkward on the base of the beach then you angle the one Orlando and add only one you can make you angle the one Orlando one.

Let's see what is in my pitch. Let us see what is pitched at define the ratio between the angle motion and the land motion that specific the beach can be determined amount of linear translation in mm or inch per rotational Altis, that is 360 degree and I'll go off to college. Okay, normal. Let's see what is my fixed bar? Let us see what is the fixed part of fix that is the anchor symbol, the location in a space of a part in the assembly choose this option one apart is a kinematic and must be fixed before the simulation is possible, it is the location on a you cannot take the toolbar icon I will show there that please note that the mechanism need to exist before a part can be defined. click on Insert he will get a fixed part.

Click on this fix part and I will fix my it will rotate or it will rotate which you want me to fix anything. Suppose I'm fixing this one, fix this one. Afterwards you have 10 minutes later, the mechanism can be simulated now your mechanisms can Miss America just click on OK. Then go to insert go to simulation in this only the length have given Oh is going to outside also just take care but I just think it is minus 128. That's cute in indeed. Click on OK. See And finally, I want this much only. I will do this 30 Okay, Cape position on eggs.

Let's see what this mean by the key position on exit. Remember the current position of your mechanisms When you are exist, the mechanism simulation if option is not activated the mechanism can be will return its original position when you exit it. So we need to keep the polish on on exit. Let's see what is a check joint limit. When activated this option open a dialog box that check to see if the joint is limited. I are being to check recheck throughout this simulation and click close Connie inside this is let's study about this toolbar simulation player and commands this symbol Should I jump to start or return instantaneously to the beginning position of the simulation regardless of the current location.

This symbols show the step backward. The step backward one frame at a time. This symbol show play backward play the simulation integral was from the current step until it reached the beginning this symbol show the pause the simulation this symbol show play forward that played the simulation forward from the current step. The symbol show the step forward a step forward to the simulation and the one frame per play. This symbol show jumped to the end, the escape die instantaneously to the end of the simulation. Now, this is for one time this is for the looping it will go up and down in rotational movement and even the rotational one only.

Just get this paid as low. Click on this play button. See our object is moving this is all screwed join I hope that you have understand this anything regarding problem you have to take me in this section. Just click ok then or finding the class, click on Insert, click on clash just apply here don't do anything your wicked clash This must be ISIS awkward in between the nut and bolt whether this is just it is at the start one at the end, nothing much more friction there and apply. Okay. application you will find the interference here the clashes there.

Let's double click you will find the clash after clicking this Okay, we went there, then click on OK then it feel fine. You have to find a mechanical analyzer. Let's see what is my mechanical analyze first? Let's see what is that analysis mechanism, we have to perform the detail of mechanical analyze of the mechanism and review its performance, the Analyze of mechanism commands, we'll just do that. That command that I've shown you. I'm doing it, it's located in a deal and view the M you can emetics toolbar to analyze the mechanism to create if other mechanism can exist, they can be selected from the mechanism name and alleged and the new analyze information will be displayed for a selectable mechanism that along the indicated if there is a possible for the simulation why the mechanism the mechanism can be shown for an example that cannot be simulated though In this option in the mechanism analyze and the dialog box are discussed as below.

Let's see what is the mechanism name, the name of mechanism being analyzed. Let's see what is the mechanism can be simulated indicate whether the mechanism can be simulated or not. Let's see what is the number of choices, the total number of join in the mechanism? Let's see the number of commands the total number of driving combined in the mechanism. Let's see what is the degree of freedom without the command the degree of freedom among all part before taking into account any driving command in the mechanism should be most least one and show the equal number of Command let's see what is the degree of freedom with that command the number of degree of freedom in the mechanism only one driving command are considered should be zero in either performance of simulation and let's see was is to get the mechanism name I've given the mechanism name as well and mechanism came sooner it is yes it is can be simulated, number of drawings won number of C'mon one that amount of junk that is our join.

Number of command is one degree of freedom of command is gone. I have given the length of one not angled one and degree of freedom good command is co regulation point at it will show from year to year. That is the screw symbol after click on this sale and this one Whoo, joy, I'm giving him yes closure. Just click on yes, you have to define variable to say and just click the name. You can change to x y or x and I'm keeping in Excel. Just save it.

Now just opened a folder where you have saved I've saved in music and cat here. Now my cat was a mess clusion I'm opening disclosure. Here you will find all that are about what have done what what types of calendars here you have use. The solution can be awkward or aligned is there and you're the name everything will come here. You can watch in uniform. Now time for closing this.

If you want to change anything you can change in Syria, double click on the simulation Don't give one give this position on exist This is because I have gone beyond that properly just clicking ok and this was our there you can change the ordinance also. And if you want to change the mechanism join you can change in the server in simulation in join in school john you double click that and you can change your triangle. You can change the length also. In class ghost angle is devoted here to here Megan's getting smarter. If he does want to do you can do that mechanism one, or you can open from you're also just double click your mechanism exit this fall below blue. This one was paid and play that was showing the animation this was an emission point and just clicking okay fun.

I will tell you after that one and this was our school john you have it you have understand everything in detail what is schools and what how to do a class or the class is offering an elaborate thing. I hope this will benefit you. And any changes you have to do you can do here in Fila classes. I will tell you how to do any changes And thanks for buying this course. I hope that it will benefit you in future classes. And this course will help you in your professional indicator software.

I think so. Thanks for watching your next class or saving this just click on File and Save. I hope you have understand that saving procedure by phone, this class very nice class.