Hello everyone, in this lecture we are talking about project browser using the project browser. Your project browser is complete virtual building that can be view added 3d dimension to dimension in various reports. And as a view view is listed, and access from the project browser palette, which function are must like table of context from your from your project. So similar to context telling where you to locate various aspects of work, you can use the project browser to locate views in the project browser. So let's start the project browser. Now when we talking about this project browser, so we can see that this is already shown here in a display And the left corner.

So if it is shown, so that is okay if that is not in in our next stop. So where you have to go first into the view option, click it, go to the interface, user interface and checked Where is project browser you can see that there are few options here v q, navigation bar Project Browser, you can see there is a right click that is already in a project process and that's why it is it is displayed on your on your on my PC or if I switch it off this click one more time. So you can see that there is a reminder here to save the project. Yes sir Again, you can see that the project from the project browser are not shown right now, when we click one more time, you can see it will come automatically fine. So, when you go to the project browser, you can see that the all the options are shows.

So like a view on structure plans, floor plans, if you select this day you in the left hand side, you can just see the small I can have plus and minus if you select this minus so the option of the floor plan that will be not displayed when you again select this option. So ceiling Billing Option is also gone. When it's like this, when you want to minimize the option. You can see that in a very few there are very few levels that are given right now, when you want to go into the deep just suppose if you want to work in a floor plan only. So, go to the floor plan option this like this, you can see that there are a number of floors that are that we work here in this project that are displayed here. Fine, when you go to the View All option you can see that in a Properties panel that is already changed here in Properties panel, the project browser views all that are open.

So you when you go for this option, there are written the all the views, discipline view, not on sheet face and type discipline. I want to view all because I want to work on all these views. So you can see in whatever the browser of the project where you want for the 3d elevation you go you have some sections, so You got this section so it's shown here if you have any shared use if you have any sheets, all the things that are shown here suppose I want to work on the first day or is when you go for the first floor. If you want to work for the 2d plan also here to go for the floor plans. Suppose you want to work on the first floor so I click that first floor here. You can see that the first four are shown here.

This is my first foot. If I go for my roof, you can see these are the roof details that I that are shown here. If I click minus one that is my basement. So you can see my basement or Wi Fi that is zero I take that zero as my ground floor. So this is my ground floor. So whenever the labels these are the floor plan, these are the labels Minus 101 and roof you can create it by name also by ground floor first floor, second floor, third floor roof level or undergone whatever the whatever you are comfortable in doing that, we can use that and again when you go for view all you can see the structure plants in they I didn't use this a structure anything in this project so, it is empty right now, when you go for the ceiling plans, you can see these are the ceiling plan of this project.

When you go for the first floor ceiling plan, you can see this is the ceiling of my first floor when we go for the roof, this is my roof of the of this modular. So, this is very important. And when you cut the section, here the option you are saying just I want to go to first flow and I want to cut the section I want to see that when you go To the View tab, we can see that Options section. This create a section here if you want to view the section, you can go to the View section, you can create a section and you can see the section of any view. So, just suppose go to the roof level, when I go to the roof level also, I already create the section, there are some section that I already created. When I go to the, I want to know that how many sections are there and where are the sections.

So go below this in this project browser to the section option, this section option if you click it, if this is not shown, so like this is so you can click it plus sign here. So you can we got this section, this is section one, Section two, Section three, Section four, section five, there are five section that are cut here. You can see that 1234 and five, the five sections if you want to view the section There are two option if you click it section one, then also get the section if you play to the section two, you get that another section view, you can click section three, Section four, as a section five, you can view like this also, or one more thing, when you go to the roof, you can see this is action, you have to just click double click this arrow. So, you get automatically in a section after that there are more sections that are already here.

So you can you one by one, hi. So this is one more thing or when you are working on a very complex project or there are lots of option in a project browser. So how can you find that? So you can do one thing, go to the views panel, and just right click it. Go to the search option. I can search anything suppose section and go to the next you can see that you are automatically go to the section panel.

If you go to the next again, then there are section one, section two. So you can relate that when you when you have a very complex project browser and you need to lots of time to find it. You can search it by this go to the View and just right click and there is Option A search you can go and you can search it by a perfect word that you use for in this browser plane. Okay, so this is a very important thing. And if you go to the floorplan one, and this go to the right click so there are lots of option. You can see there's open finding any use apply template properties, duplicate so if you go to the selling panel and you I just go to the right click there are only few options search expanded collapse selected or since this is the collapse all sorry.

So, this is all this is all other options a view that is common, but when you go to this particular there are lots of options. So, you have to always recheck that we're after getting to the to the any values or any commands just right click and check what they will need if there is any help you can always see that because explainatory of these things are not possible to the empty view. So, so, this is all about project browser you do Model Model anything in this architecture. You can see this is the this option the project browser and you can go to the every option and learn in a deep manner so that you that helps you to model in accurate automation Professional big. So this is all about the present browser. Thanks for watching.