Hello everyone. Welcome to our next video. In this video we are going to talk about pre visiting bit quit full load, which is one of our products on a zoo if you are not using a zoo cloud services, or if you want to deploy your product bit at full load on Google Cloud or AWS, you can refer to our other videos our provisioning bit quick full load, or Google Cloud or AWS. This video will cover provisioning bit quite early or the USB cloud platform. Also, if you're following our other videos, or provisioning other products on a zoo, this video will be similar to that. So for example, if you go to support we have a lot of other products listed out here.

Like Python, a machine learning And then there is what guide for getting started guide for Python, AI and machine learning. So if you are familiar with how we provision these products or a zoo, this video will be very similar to that. So if you follow those videos and provision any other words to proceed from taking a test, you can follow the same process to produce a Bitcoin full node as well. You don't need to follow this complete video. Okay, so having said that for any new user who doesn't know how to provision our virtual machine or a zoo This video will cover that part. So let's get started.

First of all, to provision the Bitcoin full load or reserve you need to go to our website. Click on Bitcoin full load Click on this get it on a zoo link. So this will take you to the zoo marketplace. From there you can provision your Bitcoin full load preset that you need to just click on get it now. Then you need to provide your user ID and password and login to the portal. Once you're logged in, then here it will ask you to show you the information and you can click on continue and it will take you to the Azure portal.

So once you're logged in and take it to the Azure portal here, you can click on Create select your subscription select your resource group You have some virtual machine name to your virtual machine, I'd say marketplace. Select the region, you can go with all the default values over here, you don't need to worry too much about changing it. Then on the size as well. The default virtual machine is a two virtual CPUs and eight GB RAM, which is B two Fs. If you want a more beefy machine, you can always change the size. Of course it will have impact on charges depending on what virtual machine you select.

Next is administration account here you need to go with password for authentication. This is very important because the virtual machine comes with a remote desktop. And for that remote desktop, you need to have user based authentication. So password authentication is what you need to select. Now the user tab here, again, you need to be very careful. user base should always be open, because the virtual machine is configured for this user.

Give it a password. Click on Next. Select standard, HDD, that will have less cost associated with it. If you want a faster disk, you can go with premium or standard SSD. It's up to you but I will suggest go with standard HDD. Another important take with this VM is that this VM comes with please see you guys So Bitcoin node, right?

So the Bitcoin ledger is saved at that Bitcoin ledger size is very significant. Okay? It is at least 250 gb at time of recording this video okay. So this video will come with what predefined disk okay additional disk attached to your virtual machine and that will be displayed over here okay and you will have additional cost for this attached disk, this disk size will be somewhere around five GB because you know because of the size of the ledger, okay, so this thing you need to keep in mind. You don't need to change any configuration but just to let you know it will have this extra disk associated with it in addition to your boot disk. Next thing is networking.

Again, go with the default options. Next is bad boot diagnostics you can switch it off otherwise you know it will it will make use of sub storage account that will incur some additional cost. Text is advance here also go with the default but then finally if you want to add any tag you can do that I've skipping that part. Finally, you can click on to review and create. So it will review at finally once it validates all the configuration settings, it will say validation passed, you can click on Create. So this will go and provision our virtual machine from the web.

It plays into your environment. It will take a while because the virtual machine comes with you know, extra hard disk with sync ledger. So you need to show some patience and wait for it to get for reasons. So my deployment is completed now here it says deployment complete. You can click on Go to resource and get the details about your virtual machine. So this virtual machine can be accessed either via SSH or you can do remote extracts.

So I will show you both methods. So first thing is through SSH. For that you need to copy the public IP address. This public IP address will keep on changing for every restart. So I suggest you can you go and continue Got the DNS so that you can use the DNS and it will, it will. It will be the same even after the start so you can click on configure DNS give it a unique DNS name.

So here for example, pick by road it will validate it. Okay, this one is available, I will cut simultaneously copy the folder, click on Save. So this will configure your DNS tab. Now we can go back to the overview tab. And here we have the DNS tab. So instead of IP, I will use the DNS tab.

And we will get corrected to this work so far that I will use putty So this is you know, most of you must be familiar with what a putty program is I will copy those BAM it will prompt you for the certificate accept that word. And then here you will log into the robot and give the password the same password you gave while creating the virtual machine. And now you are connected. So this is one way of connecting to the remote to the virtual machine the other ways Remote Desktop you could go to the start menu search for the ball extra. Select the remote desktop, paste your DNS slip. Again it will prompt you for the certificate.

You can check the box click yes and it will get caught. So here you can see I'm connected to the Bitcoin full node Through the remote dekstop so these are the two different ways you can connect you can use the putty and connect through the shell or you can make use of remote desktop and connect to the virtual machine. So just to summarize, In this video we covered how to provision the Bitcoin full node on a zoo. You have our product page on the website and from there you can go to the Bitcoin full node, click on Get it on a zoo, it will take you to the marketplace and click on get it now and for visa. The other way is you can directly go to the Amazon Marketplace for example here and just search for Bitcoin or Technicolor test. If you search for Tecla test, it will show all our products you can select between full load and follow the get it now.

Process. Okay, so thanks a lot guys for watching and in our next video we will talk about the Bitcoin full load, what are the features? What is the functionality, what are the different setups It comes with? So thanks a lot for watching