When we want to measure angle as well as to create Angular guidelines, we have the tools that is named as protector tool through which we can create these things. So, we have this tool here that is protector and you can see the icon of this tool as well as another tool, you have this protector tool. So you can select it here. And you can see the cursor has changes similar to the rotation tool that we have got. But right now what it will do, if I want to measure this particular angle with this particular bass, so what I will do, I will just drag my cursor here you can see it's along the green axis, the vertical axis, and I will just select it. Left click now it will it is when I Drag it you can see the angle is changing according to that, as well as it created a guidance along with it.

So it's quite helpful for us. So if I want to measure this angle, you can see when I click, I can Sorry, I will do it again. What I will do, you can see the angle is shown shown here is 53.1 degree. So, even after clicking here, we can have a guideline, which we can replicate later if you want to create more triangle that is this to prove to have this particular angle here. So, we can have something like this. So, we can create a triangle whose hypotenuse angle is similar to this.

So, it's quite helpful for us to replicate the same Angle Hill. And to create what I would say, angular guidelines, the tape measure used to create parallel guidelines and this protector tool used to create Angular guidelines. So let's move to the next thing I wanted to share with you is that how to create roof let's create roof on this particular what we can say there is a full wall or houses here we want to create a slow period. And if you are aware about the roof and its system, we have roof and slope defined before. So they are pretty standard slopes out there. And we have ratios actually.

And along with that ratio, there comes a degree. And I have remember some degrees, which I'm going to use here, and we can start working on it. Okay. So I want to create a roof that has internal angle is 26.5. So I will just provide a roof slope from only on two sides first. So I'll select protector two, and from there and I will create a guide in of 26.5 26.5 or I will make 30.

But still if you want to see it as a standard size, standard angle, it's 26.5. And you can see we have guideline from one side and three will create another similar guideline. Another similar guideline from here. Okay, we'll make it again. Okay 26.5. You can see below I am writing the angle here and now we have all triangular demarcations where we can create a triangle, so I'll use my pencil tool, and I will mark this, this particular intersection.

So we have a triangle whose internal angles are 26.5. And we can create a roof by using push or pull tool. So we'll click and drag it till here on this edge and I will delete the guidelines. And you can see we have a roof or standard roof here. And it's really easy to create a roof here and the protector to hablas to create proper angle here. So it's helped us a lot.

So if I want to create slow from all four sides, all right, no, it's two sides. If I want to chamfer it from here and chamfer From here, so, what I will do, I will just what I will do, I will have to create here, so I will use protector to and from here to here, I will make it 26.5. But you can see this angle is going up we need this intersection of this particular angle, but we can't see it here. So, for to get this particular point to have this particular angle at 26.5. You can we can do another thing, like what we'll do is that we will use tape to and we'll drag it from here and until it hovered around that this guy here we get option from that it's the point is On the top of this particular word ties, so, we will click it here you can see there is another guideline we have got and another time I will drag it here and till the intersection with this particular line we have another guideline and till here to here we can create another way.

So, we have got this PowerPoint which will have this intersection if we want the 26.5 degree as a sloped roof, roof slope. So, I will just create line here and line here and this is the pretty much we have, we can do well it is the guidelines we have, it is a it is the guidelines. Now, it is the ages and now you can see we have got a roof which Has slope of 26.5 similar to the two rules. Let's try this same exercise again what I did, I did protector use protector tool and I drag it here and from here I provided it 26.5. And similar to that I used tape measure tool and hovered around this vertical pervert ISIS and till the intersection here and from there I projected this line to the center of the center ridge of the roof. And from there, I use pencil and I added this tool here and I have released it this and this.

And you can see we have God the shampoo rules or equal slope two from all four sides. So it helped out a lot So, try this tool that is protector tool. It will help you when you are going for something new something complex modeling, it will actually increase your accuracy. It will help you. So try this tool. Thank you