Let's bring in another component, drain three. So here again, I'm clicking insert into current design. And I'm closing the data pan. So, again, I'm just clicking cancel, so that it is randomly shown over here. Now, if you see here, after going through the drawing given, I understand that this should be pleased here and again, tightened using SQL, which is actually the train for component. So, again, I'm going to click j in my keyboard Now it is asking me continue our capture position, I'm going for capture position.
And now if you see I'm selecting this portion, the stock portion and then I'm clicking near this position. So you can see, actually it has gone inside so I can flip the direction. For clarity, let me show you in wireframe mode. You it has gone inside, so I can click on flip, so that it has coming outside. Let me turn and see. Yes, it has exactly come to the position and clicking OK Let's get another component.
So from the data panel, I'm going to choose train for and I'm going to insert it into the current design. So here again, I'm clicking cancel, I'm getting this component over here. Now, this portion or this outer portion has to exactly meet with this portion of the screw. So I'm going to select j and C capture position and my component wants position is this, this and this coincide so they see that you are selecting only the outer portion Now it is intact. No, I'm going to get drain nine portion. I even have to add the wheels.
But as the beans themselves are in assembly, we will do it in another fight and get that assembly into this fight. Let us bring the next component the strain nine and insert into the current design. So, again I'm clicking cancel and I'm closing the data panel. So if you see Here, this portion or this face should exactly mate with this portion simultaneously. These extrusions should be able to go inside this portion. So here, I'm clicking jafer joint, and I'm saying capture position.
And you can see here, I'm selecting this portion. And sorry, I think the company was also selected. So again I'm selecting it this is the portion to which it should be. So now you can see that all the others are also in position. We can find it using wireframe and see how all the other all the other extrusions are also properly placed and making going to shaded. So are these rigid giants that is they will not be able to move