Oh my god everyone we just did HS RP now we're going to go ahead and talk about v RP they're essentially the same thing but it's an industry standard anybody can use this and I just Cisco proprietary back in 1999 Hs RP was before that multiple vendor and as you can see here faster timers right one thing that he said he didn't have but now that's not the issue now with VRP HS RP use them by active groups with the RP okay now we have master and backup master and backup. Standby group is V RP like an HS RP there's no HS RP command. It's a standby command. Here we use vrrp command. Alright, and we created the root cellar. The master router can share the virtual IP address so not He shares a virtual IP address with everybody else.

Again, the timer's they can go down to milliseconds. They advertise, okay, and the master learns, alright, you configure vrrp groups, you optimize the settings that we saw in HS Rp. And then you verify is the same thing as h SRP. That's why you'll see this very little bit. Because it's the same thing. I'm going to go over the same thing that I just said.

It's just RP is the same exact thing, the difference, V Rp. That's the difference. That's the difference. And of course, you have the master and the backup, where the master is sharing out the virtual IP address. That's it faster timers, but again, that's not an issue for today. All right.

But if you need to keep something for certification person purposes, Master backup VRP command, it shares the virtual IP address. That's the difference. Between now on and HRP See you in the next