This is a small session about the component class of one year later we have learned how to do the customization of cross referencing signal source and destination error optimization. Now, I will draw three phase line here and they also let me draw an icon menu. I'm going to put a relay here. I'm going to relate here. Back to one car one. The no interceptor you can very well do the settings for this relay, an account and all you can fit here.

Want to know I just needed to enter to NC okay. I don't want that here you can in fact, even give the pin list the way of giving pin lists when described here. If it is, you know first start with one if it is NC start with this okay in this a form if it is form see conduct start with three. The first two digits is for whether it is a no DNC or what and the next two will be the pin numbers. In fact, here I have given to and no contact. So, I can give pin numbers for the first contact is here.

No, the pin number is let me say one and two. Okay. The second contact is again here no and the pin number is three and for paid quantities, my NC two two no sorry I have already inserted two here now, the third one is VNC for that I have to pick this is the type two two here two to four NC and Levon comma told again it is NC two comma 30 and 40 in this way you can assign the pin number here, pin number I have it you can assign the contract and pin number okay okay. So, you see the pin numbers are already here whatever I said Therefore, I know I have I said it 234 NCAA I said 1112 and 1314 that is here if you go and take the properties of this particular sheet cross reference, so, this is in graphical format now, for the moment I will teach you to text format okay activity Okay.

Now you see you're here you cannot see anything here no contact can see contact you Everything is gone now, in this particular sheet. Let me do one more question here to try What is it? Okay one car, one car or different unmatched pin. There is something wrong with the pin numbers we just say doesn't matter. Okay. And now what I will do is I will insert a contact of this particular field here I would collect the third Okay, now I have inserted one no contact of this particular.

Again, I'm going to motor control that recoil. I'm going to put a coil here when I'm walking one again that the, the no NC contact here, one and no one can see additional contacts, whatever you want. And the same way you can set the pin number. Okay, pin number also you can say right in as per this description. I'm not doing that right now. Now, again, I'm going to insert the power contact.

Down. parent. I'm going to select this okay. Just to do the cross referencing See, this is how we can do the cross referencing component cross currency in normal text representation. But there are other options. graphical format, go here, you can set up the way you want the graphics to be.

You want it this way. Or you want in this way, you can take for, you can, even without these symbols, you can just do the mapping and no E and C and all these varieties use but it's not used display and use the children. Count tells you everything. There are many many options. Right now. I'm putting to think this one Okay.

So you have to do combat and cross reference update on cue changes, okay. Now you see the 192 numbers these two three b 4923 b is coil is in fiber or it is in fiber these contact three and no contacts are used for See, I have not assigned any pin number that's why it is not showing you in fact if I go on offense a pin number here for this example, this is not accept the pin number except the pin number which you see physically on the conductor. Three, four and the last one I'm putting by okay 12345 and six These are the unused contacts that is also shown here. number one and number three and three that is not used at all. So all the details you can put in the drive. Again if I go and change the property cross reference graphic format to thing this one, what will happen now is like this, I'm going to change it after drawing.

Okay. Okay. The second page if you want the more with the drop down for readability. Fine, you can do this and the third option the table format This is a table table format. Okay, while inserting this table, it may be normally quite big in size to drawing Okay. See the cable.

It's quite big, too large In fact I failed it. One car one quantity Number varieties used to type no NC same way. One number one word the contacts or use what are the contacts use cross referencing ever to the you can put it in the drive. If you want to change the table setting years you can do that. So actually basically this is setting which is in your AutoCAD. So go to homepage and go to homepage here.

Notation w we'll get the table editor here you can assign a table with a height, width, the depth, the text height and everything you can customize the table as per that. It can be inserted in the drawer. This is how you can put the different types of component across sufficiency in your drive. Okay, thank you