To this is the design module. Let's import the part model assembly. So go to File, here you can find import external geometry file. So click on that. So here already a how on radial sub assembly, neutral file format dot step format. So I'm going to provide this neutral file format under the description of this lecture.

So please kindly access this and use for the further processing. So once we have imported, let's click on Generate so here you can see this is our model and If you open it here, you can see there are a lot of surfaces and solid models also. For these solid models, we no need to do anything, but for the surfaces, we have to give the thickness here you can see. So, if we didn't do any thickness, we are going to experience or error. So, hold control select all the surfaces what we are seeing here. So, then we can do the thickness edge attempt to all the surfaces.

So, actually that is not surface model the piston But since we we are importing that as a neutral file format. So, normally some kind of data are going to be missed while we are converting the part models into the neutral file format. So that is a reason here came to our surface model. So we have given 0.1 so since it is in meters, I think so doodle point one means hundred mm that is very high. So let's make it only 0.01 So, that is going to come around So, that is going to come around Tencent can mmm like the two it will be okay but 0.1 So, that will be 0.1 also be fine because that will be fine 0.1 meter also. So, if you are facing any further errors, let's decrease that.

So, once you have inputted it any art model, so we can take the quality of the assembly, so if you go to the Create so so here you can see the body operations. If you find any openings. So you can use the show command, it is going to close the small openings. And there are some options see here clean body, so automatically it is going to clean the entire body if there is any data missing. So, we can apply these things if we need if you're not confident about the pod model what we have imported, but here, so it works for us. So, even if you're not confident about it, we can do that.

And so if you go to Tools, there are a few more commands available here you can see the repair. We can use these debate commands also to identify By the years and to rectify the geometry or only design methods we can take away from here you can see if there is any edges, we can use this one and here you can see if there is any holes normally the holes are very minute we can close that holes also. So that we can use the fin. So by using this we can close the small holes. So, these are the two commands available to clean up the body to idolize the body. So, looks like our bodies.

Good. And if we have any errors here you can see the model will be in somewhat local and we can find the address here itself. So let's move to the my show So go to show. This is my show. Just double tap on it.