So, once we have done with the modeling whether we have imported from the other softwares or if we create even in the answer space and modular the next step once we have done with the design is or machine In this lecture we'll see what is the importance of machine and fundamentally, what does it mean by making and why we help to do machine and all fundamental fundamental things about machine. So, here you can see. So, the purpose of machine is or the equations what are the equations really get. So all the equations will be calculated At the locations of nodes, so we'll see what are the nodes and cells everything. So, for that, their domain is going to be split into the noun geometries. So, those rigid parts are called mesh.

So, here you can see the lot of triangular shapes. If you see here cut section you can see the difference even in the inset also those things are called meshes. And it is going to increase the efficiency of the calculation and accuracy of the calculations also. And there will be lot of additional commands or support available. We can make it very small that is called free fine mesh, or we can use it as large as itself, it is called coarse mesh. So, if the number of shells are very high, we'll get more accurate results.

Or if the number of cells are were very fine, there also we'll get accurate results, but only the thing is until a number of elements with the number of elements increase, the time taking the time taken by the time taking by the solution will be more so it's better the efficient way of making is the machine should be the number of elements as minimum as possible and the results should be as accurate as possible. So we have to take care of all these notes while we are doing To my finger. So and the solution accuracy and stability also stability of the solution also depends on the machine. So we'll see all these things in the end this measure so so this is the ANSYS window and sis measure window particularly, you don't find any difference from the design modeler. Here it is. Here it is your toolbars.

And this is the detail view and this is a Manny's view and here we can see the section views. So, this is the mesh matrix, where we can see the quality of the image and this is the worksheet where we are going to work on the project. So So, this is the list of basic things about dimensioning why we have to do the mesh, right. So, so let's see, though and this measure So, your different shells will be there. One is in model Next one is a measure and next one is a solver. And so, each process will be separated to different cells.

So, the whole process is like first we have to do the modeling then we have to do the machine then we have to go for material then we can go for the inputs, then we can go for the Salvation then we can go for the post processing right?