So, this is how we got the machine. So this is very fine mesh. So, once we have done with the meshing, just click on the model where you can see. so here we can do to support cylindrical support. So that is going to be cylindrical support. And if you see the loads loads, we can't do any loads because this is only the study of natural frequency.

Where are we don't we do not need to apply any loads here. So directly go to the solutions, solutions total and directional deformations we can take. If you see the strains, we can't take the strains because we are not applying any loads. So There will be no stresses and strains, since we are not applying any loads. So, stresses and strains are simply the reaction forces. For the loads applied right?

Even the tools, fac tools we can't take anything because the reason is same we are not applying any load, right. So once we have done with the total and directional deformation let's solve the case.