So, if you see here in the detail view, so in the detail window particularly, so, where you can see the physical preference. So, this is the based on the problem you are going to solve whether the mechanical the structural, structural properties going to be solved with electro magnetics. So, where electromagnetism and all those things can be studied. There are CFD computational fluid dynamics, and explicit dynamics where, crashworthiness test and everything can be conducted. So, we can we can choose anything based on our problem. So, let's go with the mechanical for now.

So, once we help set the physical preference So, this Is the relevance. So, this range will be minus hundred to plus hundred. So where if you move towards minus, now you can see observe load mesh means so just right click and generate mesh and see. So if you move towards negative 200 the element size going to be increase, right. And I'm making it to posit 200. Now see the change gender mesh.

So now you can see where the number of elements has been decreased, right? And so let me open all these things. Then we can see The properties hit different cases, right? So statistics you can see number of nodes and number of elements, right. So this mess matrix, this is related to the quality of the mesh, so we'll see that also. So, apart from this, so, if you see with the minus hundred, you can see the changing element and node number.

So now you can see only 23 notes and 26 elements we have, right? So let's keep it so this all things should be said by the engineer who do all this stuff. So and once we are done with this thing, Next thing we have to do is sizing. So here you can see our advanced sizing function. So, if you open that, where do you can see proximity and curvature, curvature, proximity and fixed. So this curvature, so whenever we have a cause to where it is going to create more number of elements so that the results will be more accurate in that places.

So the proximity means only our small areas, let's say hold and the small elements, small bombs, these kind of stuff are in that kind of places where the number of elements will be more so we're in that area we'll get more accurate even the carburetor also same. So proximity and carburetor as we have discussed earlier and if you want to choose to off you can choose to off also. So for now the default will be carburetor. So let's keep it and the next one is more thing. Here you can see three types of smoking commands available. So low, medium and high.

So if you use low the mesh can be even if you see here relevant center, here also you can see coarse medium and fine. So coarse means where the element height going to be more you can see this is basic course. So let's change to medium and see the change. So particularly if we check the elements to 92, right so if we go to high smoothing and relevance and define, updated. Now, you can see the changing number of elements, right? So, this also we can increase iffy need