You're in this lecture we'll see if we want to create our beams, our columns, our pipes with the different cross sections. Or here we have our shortcut general method to create these kinds of structural members are fluid channels. so forth. So here if you go to concept, you can see here cross sections, different cross sections available. So, select xy plane, go to sketching, take, I'm just taking a line. So, once you have taken the line, go to concept.

So your line from sketches, select that one and select the line applied. generated. Now you can see You line body, but cross section not applied. So you can take any cross section from here, I'm taking a circular cross section. After taking that go here, apply that circular cross section. Once you have done with that, go here, and if you want to change the radius you can change.

Here I'm giving one meter, you can read of the debt, just select your line body. And still if you can't see that, go here you shared with Expedia and here, cross section solid then you can able to See that cross section. So, apart from that here we can take the section views Also, if you select that, you can take a section view like that. So of the depth just close it, so that you can come to the normal view. All right. So while saving, so you can just save it so you can see here it is going to save it as dot w bPg means that is a workbench project format.

So I'm just selecting desktop, they will be two methods. So name I'm just giving some 01. So one method is directly we can save it like this. So, till it is, it is processing. If you see that see, two files has been created one in 01 files in this system and these files. So, if this file if any files in this folder missing means we can't able to open it.

So, in that case that is not a good method. So, while saving always go to file you if you go to export, so, if it is only geometry body you can export to any of these formats. If not if it is a complete project, so, what you can do is, so, we can make a GIF file also So, while exporting it just solid body but if it is a whole project the whole project we can export it as a TIFF file, so that there will be no chance to delete or miss any files so it would be fine for modeling we can directly Save as an CS file or we can export into another format