So, next what we'll do is we'll see how we can create our slot we can we'll see how we can remove the material. So, just select your deck just so it will be fine right. So, now, we have to create a sketch the sketch on this face. So make sure that here this is the selection method. So, if we choose this you can select points, if you choose this you can select it yes, you can see the green color right. So, if you do this you can select the faces.

If you do this you can select whole body right. So whenever we have assemblies, this will be helpful for us. So for now, it No for us, so, select the face select this face. So, once you have selected the face go here select sorry go here select sketch, new sketch right then there will be sketch created right. So, go there. So, any sketch you need, so, here I just took a rectangle.

So, once you have done just select extrude here you can see. So, geometry sketch So, the sketches already created already selected. So, here the operation it will drop down Here you can see cut material, imprint faces and slice material. So we'll see what is the difference between these three things and we'll see we'll we can understand this purpose well while we are doing the meshing. So for now, we'll just see how it is going to be created. So, the cut material, it is going to remove the material.

So the direction so reverse direction, if you have a material even in the top you can go with the symmetric right. So you can see now just generated so you can see now right so that is how we can create slot here. Same thing in You'd have cut, if you select slice material, just see what is going to happen. You can see now, there are two bodies you can see one two right that is another body. So, these type of special features are available here because this will be very helpful in the machine. So, does that is how slice is going to be work.

So, you can see the imprint faces. If you see imprint faces only the faces are going to be projected. So, only faces are projected That's it, but the inside material is same. So, these are all things for the mesh. Seeing when we create a mesh, there will be different kind of meshes will do all those things while we are dealing with the mesh. So, for now, just concentrate on this.

So, they are the operations available in the extrude feature, right. So, and even if you go here we have one more thing called ad frozen. So, that is kind of suppress in modeling software where it is not going to affect anything in the assembly or in the problem. So, for now, we'll just Oh, Anything is fine for us. So, just cut material, right. So, in the next lecture, we'll see how we can do the revolve.