So go to File, start over. So the ribbon, so just go to sketching, I'm just taking a circle. So let's circle so I'm just taking isometric view. So if you just select the center, center of this, you can activate the isometric view. So the revolve just select the ribbon. So your doors kit has been selected automatically and just applied and revolution access, just select this.

So you can see the symbol that is a revolution access, applied. The type of operation is and material angle is 360 degrees, if you want you can change the angle gender. So, that is how we can create a revolve feature. So, even here also since it is just our ribbon, so what we can do is we can create or same reverse cut also here. So what we can do is, so just go to sketching, select circle again. So let's see, just make like that and go to modeling so now For anyone that's kids.

So you're just selected apply accuracies same apply. Instead of add material, you can see or remove material. Okay, so the problem is with the second sketch, so just right click, delete that feature, and Okay, it's not working. So okay, good sketches or we can delete the feature itself so Problem v. Okay, let's take new. The problem there is the sketches are intersecting, right? So okay, so what we will do is, so we'll create a rectangle.

Let's say my rectangle is here and is going to be x through selected, add material, normal instead of normal and taking symmetric instead of one meter I'm taking 2.5 meters generated. So now you can see. So now what I'm doing is same idea Choose the xy plane there I'm going to create or sketch or it might be any shape but here I'm taking a circular shape modeling so let's see how we're going to do it. That is this kid. Oh no, no also it has created has taken two sketches. Let's try it.

Now you can see Susan cities only a little distance. We can't observe the river but Okay, so you can see here exclamation mark that means the feature Jen create because that is going to be created there. It's So show what we can do. Okay. Okay, let's create or sketch here on this face. So go to sketching.

So in that cases you can use this one so that it will be normal to us. So, right okay, isometric now and or revolve Yes, my sketches that and my devolution axis would be fine right? Yeah let's try now. Okay interesting To add material, take cut material. So now you can see. So this is how we can, we can use all the operations even imprint faces, slice material.

All things will work in the same day.