Take you through the losses under performance, the typical losses measured in performance category, all the losses due to skill of people coming in performance getting killed in the sense because of still the speed can vary if the operator is very skilled the person he can able to work with refers to standard time the operator is very unskilled or a new person, he cannot or the standard output rate obviously, his output his efficiency will come down. So, that is what the skill level of people affects performance, second condition, Africa If the equipment is not in the right condition, it will start giving trouble frequently, but it will not click stop, but then then the operator will do some adjustment that is due to that is due to condition of equipment. Here we need to understand the clear difference in a session we discuss the mission big don't completely halt there is a availability factor here the mission is not completely her mission is working, but then there it will give some trouble during the time operator will be attending.

So, his efficiency will come down. So, condition of a coupon is coming undone or homeless category and minor adjustment in tooling and mold. It is similar to equipment tool and mold are in good condition but it requires some adjustment. There are some utilization we discussed about tool and more not available or repair is a completely out of control. Here it is available but Some adjustment it calls for. So, it is coming under efficiency loss or efficiency leakage under performance category, poorly ergonomics or place any workplace if it is not conducive in terms of ergonomics, obviously over a period of time the efficiency will come down.

So, it is coming under performance category These are some of the losses coming under performance. Next is the next few losses, inconsistent quality of material the quality of material is not gold, it will force the operators reduce the speed or reduce the parameter process parameter it will call for change in the process parameter obviously, the efficiency will come down. So, these are some of the losses coming under performance category we will see some of the examples of losses in Bahamas category new untrained operator as we discuss it This key category, frequent minor process settings in the equipment, minor corrections adjustment in toolings and molds operating the process or sub optimal process setting or speed either due to material or a skill level or tooling condition or a machine condition operating the process of sub optimal process setting speed, it could be due to anything due to condition of equipment or skill level of operator or quality of material or quality of tools or most motor maybe.

So, these are the examples of losses coming under performance category. Most of the time these losses are invisible, because it's not completely stopping the system system is in operation mode. But these are some other These are some other draining of efficiency. We need to be careful enough to recognize this kind of losses in the system. Next we will discuss about the quality losses.