Hello friends, welcome to this session. Today we will continue with the sketcher in this kitchen. In last sessions we covered sketching tools. We go ahead the editing commands, okay, so as usual Don't forget to create the working directory it should be your practice whenever you start to file a session today we're going to click the folder and click OK. So this you should not forget every nuclearization you should start with your working directory okay. And to create the new sketcher select new select Skitch do the name we are I'm using a default one now.

Click OK. Now, you're in a sketcher. Okay, let's start with editing one. So let's start with the first evening command that is modify. Modify is to modify the dimensions. Okay? So, let's learn I will draw a rectangle twice.

Okay, I did these dimensions first, double click on the dimension the vertical dimension directly Okay, this is my rectangle of 10 m Okay. Now, I have to add the dimension 10 m okay first thing I can do is double click on the dimension and then enter or I can use a modifier okay. So I select the Modify C'mon now vertical dimension was already selected so it has taken by this tool I can edit it drag and drag this field On the left and right or you can put the dimension values here. For example, I put eight into this regenerate command here. If I don't select this or do the dimension I will put here it will not regenerate same time. So choose five mm here, but it is not decreased or the height is not decreased until I click OK. click Modify the log scale.

It is useful to modify two or more dimensions same time and I want the scale should be same What does it means the scale should be same ease. If I modify the dimensions, the height I want to make it double 10 mm, okay. So, my length dimension 10 m will be also increased by the same scale, so it will be 20 Okay, so I don't need to modify two dimensions, I can only modify one dimension. Okay, so let's try for that I have two dimensions. Press Ctrl key. And then we can see the two dimensions are already selected 10 and I select log scale I only increase the file to 10 d m is only be changed to 20 click OK.

This is the use of locks kill. Please do it again. I select two dimensions. I select Modify tool I select lock skin, I change the height from 10 to five I click OK. See my linear diameter is also reduced by the same scale select the Modify tool, select the dimension to modify. Now what is sensitivity sensitivity is is like for example, I have to reduce and reduce the sensitivity to the wheel which is how to move out Move Move And if I increase the sensitivity the small moment of this we'll dimension will be increased a lot. Do not be useful in normal cases.

Okay, this was the Modify Come on. Have you understood this? Your Sloane another command. There is a delete segment. If you want to delete the unwanted unwanted entities, you can lose it. It's very simple.

Select the Delete segment come on and select the line you want to remove. For example, this one this one, this one very simple. Double click middle mouse button For example I got lines in front lines, double click middle mouse button, segment command and delete all these lines keep selecting easy straight in creating a rectangle now this is the extra liner how to what should I use example how to draw a circle. I don't want outside entangle entities, like blood segment. intellect for what you don't want. For example, I don't want these lines.

You can use the Delete segment command. It's really easy. There's learn the next editing command that is corner. Corner commands joins the lines or the entities. If you select them. Let's see how it works.

First I delete Okay, I'll read line. One line like this. When I draw another line like this I want to join these two lines. So I can do it by corner command. Select the corner command, select the lines by ctrl key. This way you can do it very easy.

I have another line like this and I have to join this line I use a corner command. Two lines which are how to join is a trick now. I'm selecting the line here and this line result is this one. Usually too Again, click here and this line. So it depends. Where do you select the lines?

Try it again, on this line, this line. You don't want this one. You want to be like this, like these, like these, these, and these. Click here. This is what do you want it. This way, you can use a corner command really easy.

Let's look into another example. For example Are you center another line here know how to join them. I can use the corner command command Ctrl T line your start with another unique command. For example delete everything for the mirror Come on hi Need to underline or draw a center line Okay, I have one feature for example, this rectangle how I want the same on another side of the centerline, okay. So again first select this rectangle be selected, select mirror command select the centerline no this angle is mirror for example, first we have to select select the mirror command, select the centerline and there it is Okay, select this this way and then divide. Very simple.

If you have some entity for example, line and you have to divide it at any point, you divide command and select where you have to select or where you have to delete. This way, you can delete or you can divide it I want to divide it is the word common video and then I can delete that for example, select this and delete delete part of this line cannot delete it because this line is totally selected. So I can divide it wherever I want. That divide can be useful command Rotate one for that as well you know to select the rectangle or the entity you want to rotate and then only it is activated. So by using this you can translate it you can rotate this scale it this way you can translate it this way you can scale it this way command to select the circle, as Linda did come on here Select the entity to which you have to make a translation parallel or perpendicular to okay for example, I want to translate or move this tangle parallel to this line okay.

So, a little slice means it can go up or it can go down Okay. Then I click here and select the line Okay. Then the parallel command I put the value into So, it is moving parallel to that line Okay. Go back to the control Say for example, I want perpendicular to this, okay. Then now it is perpendicular to So, here you can see the references or you can select the references to which your translation should be parallel or perpendicular, okay. You have to select a reference around which you have to rotate by default the rotation reference is center okay.

But for you you want to rotate around this corner point, then first you have to select here and then select this corner point. Now, if you do the rotation angle it will be around that corner point. For example, how to rotate by 10 degrees and put 10 and then, so it is about that corner point, rotation angle. So this way you can do it This will be run on all the reading comments, this will be useful. Okay. So that's all for today's session.

We will learn about the constraint in the next session. Hope you learned and thank you have a nice day.