In this video we are going to see how is the complete process to make this candles step by step. First we have to measure the paraffin. Then we have to put the paraffin inside a pan and then this pan inside another pan with water with never we're going to use the double bowl method. When the water is boiling, we can turn down the temperature a little bit. While we can use dispensable tools to mix the barfing will take half an hour more or less to to melt the complete part. Well, while the paraffin is melting, we can prepare the mold.
We have to use a release agent only in the places where the paraffin is going to touch. I like to make to put it with gloves, but if you prefer, you can use something like makeup sponge or some cotton or something like this. We only have to give a very thin coat. Now that the paraffin is all melted, we have to put it in a plastic cup. Be careful Because it's very, very hot. First we have to put the current and we have to mix it very very well.
And then we have to let it cold until we see at the paraffin lift this marks in the plastic cup. So now is ready to receive the essence. Now we are going to prepare the week for the delay candle. I use double filament because I want to make it enough for my tea light candle. We have to nurse it many many times until the diameter is according to the week. Hold there, we cut it and then we put it in the holder and smash it in order to place it.
Then we miss the complete week in person and stick it in the cup. When it's cold, we feel it completed up to the top. We don't need release agent in detail a cup because we don't have to remove the candle. Now we are going to start the candle lamp. First, we have to put a very thin coat of paraffin in the bottom and wait until it's cold. Then we continue feeling the most until to the top.
We will see how the transparent color become a pack. And the mold and paraffin are going to be very hot that we have to take the inside mold now because if it gets cold, the shrinkage will lead us to do it later. Also, we need to cut the perimeter 45 degrees FM showing the video When we finished we turn this candle upside down, and now it's time to fill the bottom. In this case the person is kind of cold and this is why he has so many bubbles. But if you keep the burping in warm water or heated again, the bubbles won't appear. Well, now we have to get the week of the to a candle one finger long more or less and we have to take them all out of the candle lamp when the candle lamp is all cold.
You have your candle lamp really good job.