Guys, welcome to another episode of skates. In today's episode we're going to teach you how to easily take out and put back in boards and let's get started. To get started make sure you have a skate tool and a screwdriver handy. The longer the screwdriver the better use your escape tool to take off the bolts of your truck and take off each wheel one at a time. After you've taken off all the wheels, use your screwdriver to pop inside the bearing. Use the screwdriver to pry each bearing out of the wheel.

This is the easiest way To do it without a bearing. Once you've taken all the bearings out, you can switch to different bearings, or put the original bearings in new wheels. One bearing and he started the wheels with your fingers. It's okay if you can't push them all the way in as long as they stay there by themselves inside the wheel. Use your trucks to push the bearings into the rest of the wheel. Do this for all four wheels.

Put your wheels back onto your trucks and tighten up your bolts with the escape tool. Tighten up the bolts of your trucks so they're snug enough that they don't fall off. But make sure they're loose enough so your wheels can roll free Alright guys, that's it. Now you've learned the quickest way to take out and switch your bearings. It's time to find your local skatepark and have some fun. Don't forget to like, comment and share with your friends.

Let us know what tricks you'd like to see on the next episode escapes.