Once you have downloaded this body, please save it with another name. In this video, we are going to add ribs and web to this product. So here I need a rib near the legs in this portion. So here what I'm going to do is I'm going to create a plane passing through these two axes, where I can sketch my route. So I'm going to construction, first of all I need the access. So I'm selecting this face.
And for another axis, again, I'm selecting this face. So I'm going to create a plane through these two axis so I'm taking this as my sketching plane. I'm going to the wireframe mode. I'm going to use project geometry so that I can project these lines projecting this body. Okay and I'm going to create this line Now I'm going to delete these extra lines that are created. So only my rep remains.
So I'm going to stop sketch. Here you can see the line that I've created. So I'm going to create and use the rebar option before that I will change it to shaded mode. So I'm going to the strip option and selecting this line. If you see my rope is being created in the opposite direction, so I'm using this flip direction You can see give the thickness say around four mm. Or you can increase it over here also.
So I'm sticking to four mm. And here I can change the depth, but I actually need it till the end. So I'll keep it as two next, but if you want you can give the depth also the depth will be around three four mm. So here you can see this is the depth that is created. But I am going to do next option and my rip has to be symmetric over this line. If not, I can give it only in one direction.
So this is how I created this rip. I can use the circular pattern option and create for other rips exactly like this. So I'm going for create pattern, circular pattern. In this I am going to select the feature this rip that I've created. And it is asking me to select the axis and this is going to be my axis and I need totally for and all the ribs I need so have them so they should be identical so easily I created this report We know that the same reps are needed even on the flex, so we can use the rectangular pattern option. So I'm going to create a pattern rectangular pattern.
In this I first need to select the features so I'm selecting this rip, as well as the circular pattern and the direction I first we'll select the direction using the axis and this direction and I also need it in this direction. I need to in each direction and I know that the distances 180 So here you can see how easily I could create the directs