Parametric design can also be applied to assemblies. And this I have this big container. If you see if I'm changing the diameter of the base, you can see how gap also has changed. So let us design this and see how we can apply these parameters in assembly. I'm first going to sketch and we're going to draw a circle. This is going to be the diameter of the base.
So here I'm giving it 100 and the parameter is d one. So for the distance, I'm going to give it in terms of d one. That is five times of the one or five times of diameter, the height is going to be five times. Now the inside thickness, I'm going to give it as two mm. Now this is ready, I'm going to change this boat into a component. I'm going to name it as base.
Now that the assembly symbol has come, I can create another component called the cap. Now you can see the cap is activated and the pillbox has been turned translucent. Now I'm going to sketch the cap. I'm drawing the construction line. I'm going to draw the cap using the arrival option. So I'm going to give a little bit of tolerance of point to so that it fits well.
I can get the height Have the cap proportionate to the base time it did D one. And this height in relationship with the diameter, I'm going to specify this. So instead of the one by five, I'm changing it to the one by two. So this is going to be the extent to which the cap is going to surround this pill container or the base. So now I'm going to rotate this, about the axis. Deena, I'm going to continue By adding one more feature that is the recall option for creating the above portion of this gap because I have used the projected motion later it will change according to the changes made in the pace motion.
I'm trying to revolve this arc but I think the line is interrupting it. So I'm going to first delete this line and create the small line so that this is chosen Now I'm going to revolve it so my campus ready. Now I'm going to shade it more and I'm going back to my SME. So here I can apply some colors and for the bees after activating it I can give a translucent color have given actually clear. So, here my fill container is ready and now let us try to change the base time meter that is d one I'm changing it to 50. Now I can go to inspect and measure this.
And you can see, the radius is 25. But the whole pillbox has changed accordingly, including the cap. So this is the advantage of designing things using parameters.