To the next command available in mesh controls is the inflation. So where we can create all layers of mesh as we have seen in the previous lectures or structured mesh, so let's do that. So select so just select the face and So, k selected Bondy's duck face. And here you can see number of layers and just giving it as five growth rate. So let's keep it as default 1.2 then check how it is going to change So, you can see here and here you can see the error, right. So just delete this and generate mesh because the map phase machine is going to change the unstructured mesh into statute.

So that is the reason we have. So let's generate it again. So there should not be any error. So if you have any errors that there is going to be pop up here. So okay, no mesh information so let's delete it and create it again. So first updated here also directly connect sisters inflation so all right let the body and boundary.

So, that is my boundary maximum layer. Let's keep phi and let's check now. So, the methods so relevance is high. So, I think Yeah, let's check now. So, you have to see the errors then you have to rectify it pre inflation layer can stop you because of sight face limitation. So not only creating a mess, you should also able to clear all these errors Right.

So, let's change to proximity and curvature then gender mesh. So, now you can see there is no error right. So, why I held choose in proximity and curvature. So, if you have any curvature where it is going to consider that and and if we have any small areas it is going to consider and it is going to smoothen the elements there. So, now, there is no address, you can see here the layouts of elements. So, if you want to see clearly here you can take the cut section just cut it.

Now you can see if you want to see more clear here, you can Click on it you can see the inside elements also. So, this is how the inflation work. So, this will be very helpful See, only the elements in this face has been increased this, this face elements are constant. So by using that, we can decrease the number of elements if we choose the global settings. So, where we have to increase the elements in whole body to it will increase the number of elements. So, the problem going to be take much longer